Xerox DocuColor 2240

4–10
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Audio Tone Settings
This determines whether there will be a sound to signify the end of
a job or when a machine fault occurs, for example.
Audio Settings allows you to set the following items.
Control Panel Select Tone Sets the sound heard when the correct button was selected on the
display. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Control Panel Alert Tone Sets the sound heard when an incorrect button was selected, or
an operation was attempted during an error. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Machine Ready Tone Sets the sound heard when the machine is ready for copying or
printing. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Copy Job Complete Tone Sets the sound heard when copying has been completed
successfully. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.