USER GUIDE (MACHINE
ADMINISTRATOR)
4–11
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Non-Copy Job Complete
Tone
Sets the sound heard when a job other than copying has been
completed successfully. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Alert Tone Sets the sound heard when a job finishes abnormally. It can be
set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Fault Tone Sets the sound heard when a fault occurs and the job is held in an
abnormal state. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Normal.
Low Toner Alert Tone Sets the sound heard when the drum cartridge or toner cartridge
has to be replaced. It can be set to:
•Off
•Soft
•Normal
• Loud
The default is Medium.
To Next Page
Loading...
Need help?
General
