USER GUIDE (PRINT)
2–97
U
SER
G
UIDE
(P
RINT
)
At the Printer
1
Press the Job Status button, on the control panel.
• The Job Status screen is displayed.
2
Select the Secure Print button.
3
Select your User ID, then select Show Document List.
• Refresh the document list by selecting Refresh Status.
• If a password has been set, the password screen will be
displayed.
• Information about the saved document will be displayed on
the specific user ID screen.
4
Select the document to be printed, then the Print button.
• The confirmation screen is displayed.
5
Review the contents displayed, then select from one of the
following selections:
• If Print was selected in the previous step: Print and Delete,
Print and Save or Cancel
• If Delete was selected in the previous step: Yes or No
6
Select Close repeatedly until the Job Status screen is displayed.