4–44
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Scan Mode Settings
These settings are enabled on scanner features.
For more information on scanner features, refer to the User Guide
(Scan).
Basic Scanning Presets
You can change the magnification rates assigned to the buttons
displayed in R/E Presets on the Basic Scanning screen.
Setting frequently used scan ratios prevents you from having to
change the setting each time you scan.
The following items can be configured in R/E Presets.
Reduce/Enlarge Presets
2nd ~ 4th Buttons
Set the ratios displayed for the 2nd to 4th trays from the top down,
for each of the feature buttons. Select available ratios from those
currently assigned to R/E Preset buttons.
Enter the setting using the number buttons listed in the following
table. The defaults are: 2 for the 2nd tray from the top, 4 for the
3rd tray, and 7 for the 4th tray.
Setting Description
1
Ratio set to R/E Preset 1
2
Ratio set to R/E Preset 2
3
Ratio set to R/E Preset 3
4
Ratio set to R/E Preset 4
5
Ratio set to R/E Preset 5
6
Ratio set to R/E Preset 6
7
Ratio set to R/E Preset 7
To Next Page
Loading...
Need help?
General
