Xerox DocuColor 2240 User Manual

USER GUIDE (MACHINE
ADMINISTRATOR)
4–9
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
Auto Clear Sets the time to wait before returning the Control Panel to the
default screen. The amount of time until reset can be set at:
•0
OR
• 60 ~ 240 seconds, in 60-second increments.
Enter the value using the numeric keypad on the Control Panel.
The default is 60 seconds.
Auto Job Release Tells the machine to release the current job to enable the
execution of the next job when a mechanical error occurs during
copying or scanning. The job can be executed only in parts of the
machine that are functioning normally. Set the time to:
• 240 ~ 5940 seconds (4 ~ 99 minutes) in 60-second
increments.
Enter the value using the numeric keypad on the Control Panel.
The default is 600 seconds.
Auto Print Allows the machine to automatically start print jobs when there
have been no operations for a set amount of time. Set the time to:
• 1 ~ 240 seconds in 1-second increments.
Enter the value using the number keys on the Control Panel. The
default setting is 100 seconds.
Auto Power Saver Low Power Mode and Sleep Mode are part of the energy-saving
mode. As time lapses, the machine lowers power consumption:
Last Operation -> Low Power Mode -> Sleep Mode.
• Set the time to Low Power Mode from 6 ~ 240 minutes and
• Set the time to Sleep Mode from 0 ~ 234 minutes
Both are set in 1 minute increments.
NOTE: Low Power Mode cannot be set to 0. The total set time of
both Low Power Mode and Sleep Mode must be between 15 - 240
minutes.

Xerox DocuColor 2240 Specifications

General

Brand	Xerox
Model	DocuColor 2240
Category	All in One Printer
Language	English