Xerox DocuColor 2240 User Manual

2–40
U
SER
G
UIDE
(P
RINT
)
5
Click Next.
• The Select the Printer Port screen is displayed.
6
Select one of the following and then click Next.
• Use the following port.
• Create a new port.
7
Insert the CD-ROM in the CD-ROM drive.
8
When the Add Printer Wizard window displays “Manufacturers
and Printers” lists, select Have Disk…
• The Install From Disk screen is displayed.
9
Enter the path for your driver files in the “Copy manufacturer’s files
from:” box.In the example below the “D” drive is used.
Example: D:\PS Drivers Carrera\CarreraWin2K-
PSCRIPT\XRDC550.inf
NOTE: You can also use the Browse button to specify a folder in
the CD-ROM.
10
Select the.INF file, then click Open.
11
When the Install From Disk screen is displayed, verify that the
path and file name are correct and click OK.
12
Select your printer model from the “Printers” list and click Next.
13
Enter the printer name, set whether you want to use it as your
default printer, and click Next.
14
Select Do not share this printer, and click Next
15
Select Yes to print a test page, then click Next.
16
Click Finish.
17
Verify that the test page prints at the printer then click Yes.
18
Confirm that the printer has been added in the Printers window.
19
Configure the print driver to complete the installation. Refer to
Configuring the PS2 Print Driver on Windows 2000/XP procedure,
in the User Guide (Print).

Xerox DocuColor 2240 Specifications

General

Brand	Xerox
Model	DocuColor 2240
Category	All in One Printer
Language	English