USER GUIDE (COPIER)
1–51
U
SER
G
UIDE
(C
OPIER
)
Multiple Up
The Multiple Up feature enables you to copy 2 or 4 images from
multiple originals onto a single page.
NOTE:When using this feature place the originals in the DADF.
NOTE:Depending on the size of the original, some image loss
might occur along the edge of the image.
The following options are available:
1 Up Copies one image on each output copy.
2 Up Copies two images on each output copy.
4 Up Copies four images on each output copy.
1
On the Output Format tab select Multiple Up.
2
Select the desired option:
• 1 Up
• 2 Up
Select the desired Image Order:
• Left to Right
• Right to Left
• Top to Bottom
To Next Page
Loading...
Need help?
General
