1–64
U
SER
G
UIDE
(C
OPIER
)
Mixed Size Originals
This option allows you to place documents of mixed sizes into the
DADF for copying. When the Mixed Size Originals feature and
Auto Paper selection are selected, the copier automatically
identifies each document size and selects the appropriate paper
tray. You can also specify a paper tray so that all copies are made
on the same size paper.
1
On the Scan Options tab select Mixed Size Originals.
2
Select the desired option:
• Off: when documents are all the same size.
• On: when documents are different sizes.
3
Load the mixed size originals with one edge of every sheet aligned
evenly against the top left corner of the DADF to avoid misfeeds.
4
Select the icon that most closely resembles the Original
Orientation for the loaded documents.
5
Select Start to make copies or Save to select additional features.
NOTE:Mixed Size Originals cannot be used with the following
features: Covers, Transparency Separators, Multiple Up, Auto
Repeat Image, and Booklet Creation.