4–4
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
4
Select System Administrator Password. The System
Administrator Password screen is displayed.
5
Select Off to disable entering a password.
6
Select On, and enter the new password using the numeric keypad
on the Control Panel.
7
Select Enter.
8
Re-enter the password, exactly as you did in Step 5, and select
Enter.
NOTE: Enter the exact same number in Step 5 and Step 7. If you
make a mistake, select Reset and return to Step 5.
9
Select Close. You will be returned to the System Settings screen.
10
Select Exit to exit the System Settings Mode.
To Next Page
Loading...
Need help?
General
