Xerox DocuColor 2240

USER GUIDE (MACHINE
ADMINISTRATOR)
4–27
U
SER
G
UIDE
(M
ACHINE
A
DMINISTRATOR
)
2 Sided This sets up the default for 2 Sided on the Added Features screen.
Enter the setting using the number buttons listed in the following
table. The default is 0, 1 to 1.
Output This sets up the default for Output on the Added Features screen.
Enter the setting using the number buttons listed in the following
table. The default is 0, Auto.
NOTE: If the machine is not equipped with 128MB additional
memory, even when Output (by copy) is selected, it will operate as
Stack (by page).
Setting Description
0
1 to 1 Sided
1
1 to 2 Sided
2
2 to 1 Sided
3
2 to 2 Sided
Setting Description
0 Auto
1 Output (by copy)
2 Stack (by page)