Before Using the Machine
1
47
1.7 Loading/Replacing Paper
8.
Press the <Cutter> button.
The leading edge of the paper is cut.
If you press the <Cutter> button once, 210 mm of the
paper is cut. If you hold down the <Cutter> button, the
paper comes out until you release the button, and it is
cut at the position where you release the button.
9.
Remove the trimmed piece of paper.
10.
Gently push the roll unit back into the machine all the way until it
stops.
11.
Close the front door.
To Next Page
Loading...
Need help?
General