Xerox WorkCentre 3220 Service Manual

WorkCentre 3210/3220 Multifunction Printer Service Manual 3-9
Error Messages and Codes
Paper Jam 0
After a pick operation, the leading edge of the media does not reach the Feed
Sensor on time, or the Feed Sensor failed to indicated the leading edge.
Applicable Error Message
■ Paper Jam 0
Initial Actions
■ Clean the Pick Up Roller and Holder Pad.
■ Try feeding media from a different location.
■ Check the paper path for obstructions or debris.
■ Cycle printer power.
■ If the problem persists, refer to the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Main Controller Board, PL1.0.2
■ Pick Up Roller, PL4.0.26
■ Pick Up Solenoid, PL4.0.37
■ Feed Sensor, PL4.0.75
■ Holder Pad, PL7.0.14
■ Map 2 - Drive Locator
■ Map 5 - Main Controller Board
■ Main Controller Board
s3210mfp-238

Xerox WorkCentre 3220 Specifications

General

Print Technology	Laser
Print Resolution	Up to 600 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 4800 x 4800 dpi (enhanced)
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
ADF Capacity	50 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Functions	Print, Copy, Scan, Fax
Memory	64 MB
Duplex Printing	Manual
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Maximum Paper Size	8.5 x 14 in (Legal)