YASKAWA CIMR-G5A Series User Manual

7.5.4 Option Constants: F
Advanced Operation
7-62
J
DO-08 Digital Output Card Settings: F6-01
D
Set the output mode in the following constants when using a DO-08 Digital Output Card.
User
Change
during
Setting
Factory
Valid Access Levels
User
Constant
Number
Name
g
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
V/f
Control
V/f with
PG
Open
Loop
Vector
Flux
Vector
F6-01
Output mode selec-
tion
×
0, 1 − 0
B B B B
D
The items output from the DO-08 will be as follows according to the setting of F6-01.
Setting Terminal Output
TD5-TD11 Overcurrent (SC, OC, GF)
TD6-TD11 Overvoltage (OV)
TD7-TD11 Inverter overload (OL2)
0: 8 channels of
individual
out
TD8-TD11 Fuse blown (PUF)
individual out-
puts
TD9-TD11 Overspeed (OS)
puts
TD10-TD11 Inverter overheat (OH1) or motor overload (OL1)
TD1-TD2 Zero speed detection
TD3-TD4 Speed agree
TD5-TD11 Bit 0
TD6-TD11 Bit 1
Binary
code
(see
below)
TD7-TD11 Bit 2
Binary code (see below)
1: Binary code
TD8-TD11 Bit 3
1:
Binary
code
output
TD9-TD11 Zero speed detection
TD10-TD11 Speed agree
TD1-TD2 Running
TD3-TD4 Minor fault
Coded Outputs
Bit 3210 Meaning Bit 3210 Meaning
0000 No fault 1000 External fault (EF
××
)
0001 Overcurrent (SC, OC, GF) 1001 Controller fault (CPF
××
)
0010 Overvoltage (OV) 1010 Motor overload (OL1)
0011 Inverter overload (OL2) 1011 Not used
0100 Inverter overheat (OH, OH1) 1100 Power loss (UV1, UV2, UV3)
0101 Overspeed (OS) 1101 Excessive speed deviation (DEV)
0110 Fuse blown (PUF) 1110 PG disconnected (PGO)
0111
Braking Resistor Unit overheat
(RH)
Braking Transistor fault (RR)
1111 Not used.
7

YASKAWA CIMR-G5A Series Specifications

General

Brand	YASKAWA
Model	CIMR-G5A Series
Category	Inverter
Language	English