YASKAWA CIMR-G5A Series - Pulse Monitor Card: F7-01

7.5 Common Functions
7-63
J
Pulse Monitor Card: F7-01
D
When using a PO-36F Pulse Monitor Card, set the output pulse in constant F7-01.
User
Change
during
Setting
Factory
Valid Access Levels
User
Constant
Number
Name
g
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
V/f
Control
V/f with
PG
Open
Loop
Vector
Flux
Vector
F7-01
Frequency multiple
selection
×
0to4 − 1
B B B B
D
Settings
Setting Description
0
1F 1 x Inverter output frequency
1
6F 6 x Inverter output frequency
2
10F 10 x Inverter output frequency
3
12F 12 x Inverter output frequency
4
36F 36 x Inverter output frequency
D
“F” indicates the output frequency (Hz). For example, if “0” (1F) is set, when the output frequency
is 60 Hz there will be an output of 60 pulses per second. (Duty 50%)
7