12
Maintenance and Inspection
12.4.1
Outline of System Errors
12-10
( 2 ) Accessing System Registers
To access the contents of system registers, start the MPE720 Programming Tool and use the Register
List or Quick Reference function.
[ a ] Register List Display Procedure
Use the following procedure to display the register list.
1.
Select File
−
Open
−
Tool
−
Register List from the MPE720 Engineering Manager
Window to open the Register List Window.
Refer to 2.1.6 ( 4 ) Set and Save Motion Fixed Parameters on page 2-28 for details on how to
display the Engineering Manager Window.
2.
Select View Mode
−
HEX to change the view mode to hexadecimal.
3.
Input the register number of the first system register to be accessed for Register, input
the register number of the last system register to be accessed for /D, and click any-
where in the list. The contents of the specified range of register numbers will be dis-
played.
To Next Page
Loading...
