Gen II User Manual
10-24 – Fan/Turbine Balance Chapter 10 Revision 2.10, Apr 2020
10.1.13. – Shut Down Engines
10.1.13.1. The screen will display the message “Shut Down engine per flight manual
instructions”. Press the [F5] “Continue” key to acknowledge the message and
shut down the engine(s).
10.1.14. – Fan/Turb Suggested/Installed Wts
10.1.14.1. After displaying a brief “Optimizing Solution” status indicator, the “Fan/Turbine
Suggested /Installed Wts” screen will be displayed. If this is the first suggested
weight screen, the weights will be test weights unless an established influence
was entered in the setup. Notice at the top of the screen that the message
To Next Page
Loading...
