Chapter 13
Transient Vibration Survey
(Viper II only)
(Revision 4.10, Apr 2020)
“Transient Vibration Survey” is a function that is only available in the Viper II analyzer. It is
accessed from the analyzer’s Main Menu banner screen as shown in the illustration below.
Selecting this function from the main menu brings up the “Transient Vibration Survey Jobs”
banner screen menu. Each of the listings on this banner screen menu is an option within the
“Transient Vibration Survey” function. Descriptions of each of these options follow, along with
the information required to complete the menu screens within the options, and the steps
necessary to perform the transient vibration survey function.
The Transient Vibration Survey option allows the user to rapidly complete and store a transient
vibration survey using the “Setup” feature (described in paragraph 13.1.1 below). With the setup
feature you may complete surveys on several different components without manually entering
the setup data between surveys. Each job is unique and very quick.
To Next Page
Loading...
Need help?
General
