Gen II User Manual
22-34 – Analyzer Management Chapter 22 Revision 2.10, Apr 2020
Once complete, the PDF copy can be located in the aces_manuals folder on the USB memory
device.
22.8. – Transfer Reports
After you have created a report as described in Chapter 3, “Using the Gen II Analyzer”, you can
transfer them to the USB memory device by using this menu item. Simply insert a USB memory
device into an open USB Port on the face of the analyzer and press [OK] to begin the process.
The Status Pane will show any pending reports, which will be transferred to the USB memory
device then stored in the aces_reports folder of the USB memory device. From there, after you
move the USB memory device over to a computer, you can open or print the reports on the
computer without the need for any additional software (provided the computer has a PDF read
program installed).
To Next Page
Loading...
