Gen II User Manual
3-25 – Using the Gen II Analyzer Chapter 3 Revision 2.10, April 20
3.5.5. – aces_setups
This is the location where you will store setups for later transfer into the analyzer. Each setup
will be stored in a unique file which will allow adding individual setups to the analyzer without
the need of special software or additional configuration. The setups will have to be manually
transferred from either the ACES Systems website or a prior export.
3.5.6. – Analyzer License Key
New Licenses you have purchased from ACES Systems will be delivered in a text file named
“LicenseKeys.txt”. Copy this text file to the top directory of your USB flash drive and load the
license(s) per Chapter 22. When the license information matches the analyzer and serial number
into which the USB flash drive is plugged, the menu items described in the license file will
become active and visible on the analyzer’s Main Menu. To purchase additional options, please
contact ACES Systems as described in the Preface of this manual.
Revision History
11/9/2015 1.01: Added transfer reports to USB device to Section 3.4.3.2 to remove need to jump to Chapter 22 to finish
the process. Added new screen captures and process for downloading eSetups from the web.
Lucas
2/15/2016 2.00: Major rewrite generalizing the manual to cover both the Viper II and Cobra II. This chapter was updated
with screenshots from the new website.
East
4/7/2017 2.01: Added Memory Storage indicator to status pane. Lucas
7/25/2017 2.02: Added Memory Storage Indicator to screen shots. Boyer
4/30/2020 2.10: Updated screen shots for SP7 UI changes. Verbiage update to reflect SP7 UI changes. Shively
To Next Page
Loading...
Need help?
General
