Gen II User Manual
22-32 – Analyzer Management Chapter 22 Revision 2.10, Apr 2020
22.6.8. – Format USB Drive
Your analyzer will come with a USB memory device intended for transferring data to or from the
analyzer. This device is formatted with a FAT32 file system to insure proper operation with the
analyzer’s file system. If you need to use additional USB devices with the analyzer, or need to
reformat the original device, it is strongly recommended that you format them with a FAT32 file
system as described below:
Insert the USB Device into an open USB port on the face of the analyzer.
To Next Page
Loading...
