Gen II User Manual
22-24 – Analyzer Management Chapter 22 Revision 2.10, Apr 2020
If there are any “Pending Reports” stored in the analzyer, the analyzer will prompt you to
transfer those to the USB memory device also. Use the [F1] “Yes” and [F5] “No” keys to make
your selection.
22.6.4. – Erase All Jobs
A quick easy way to perform housekeeping and clean out memory in the analyzer is to “Erase
All Jobs” from the analyzer. This function will delete all of the jobs stored in the analyzer;
however, the setups will remain intact for future use. This is a handy way of recovering storage
area after all of the necessary reports and backups have been completed without having to enter
each Main Menu item to delete individual jobs or groups of jobs.
To Next Page
Loading...
