Gen II User Manual
3-24 – Using the Gen II Analyzer Chapter 3 Revision 2.10, April 20
3.5.2. – aces_export
This location contains exported jobs and setups. Data is stored here when you use the “Export”
function found inside the Manage Jobs or Manage Setups menu items described above in
paragraphs 3.4.3.4 and 3.4.4.5 respectively.
3.5.3. – aces_import
This location contains jobs that you want to import into the analyzer’s memory. You will
manually copy files into this location for later import. Files can be obtained from another
analyzer or a previous export of the same analyzer.
3.5.4. – aces_reports
This folder will contain all of the reports generated then exported by the analyzer. These can be
either Jobs, Setups, Calibration, Setup Summaries, or Job Summaries. They will be saved in a
PDF format which is intended for direct printing or reading. No other software is required to
interact with the analyzer.
To Next Page
Loading...
