Chapter 16
Monitor Spectrum
(Revision 2.10, Apr 2020)
“Monitor Spectrum” is an analyzer function that is accessed from the analyzer’s Main Menu
banner screen. A description of this function follows, along with the information required to
complete the menu screens within the function, and the steps necessary to perform the function.
16.1. – Monitor Spectrum
The “Monitor Spectrum” function allows the user to rapidly set up the analyzer to acquire
vibration data for troubleshooting, verification of repair, comparison of similar components or
“snap shot” recording of pre- or post-maintenance conditions. As with all “monitor” functions of
the analyzer, there are no provisions for storing, reviewing, or adding the monitored data to a
report.
16.1.1. – Spectra Setup
16.1.1.1. The analyzer will display the “Vibration Spectrum Setup” banner screen shown in the
illustration below. Complete the fields as follows:
To Next Page
Loading...