Gen II User Manual
13-35 – Transient Vibration Survey Chapter 13 Revision 4.10, Apr 20
Select the desired information to be displayed in the custom report.
Press [F1] “Conds” key to select the conditions desired to be in the custom report. Press [F3]
“All” key to include all elements of collected data in the report. To clear all elements of the
report, press [F4] “Clear”. When the desired information has been selected, press [OK].
When complete, press [F5] “Continue”.
To transfer the custom report to the USB Drive, return to the Main Menu screen and select
Analyzer Management.
From the Analyzer Management menu, select “Transfer Reports”. The report will then be
transferred to the USB Drive under “aces_reports” folder.
To Next Page
Loading...
