ACES SYSTEMS Cobra II User Manual

Gen II User Manual
15-12 – Overall Vibration Survey Chapter 15 Revision 4.10, Apr 20
15.1.5.2.1. Enter the Reference Level, typically in decibels (dB), and the Reference Frequency, in
Hertz (Hz), as found on the calibrator. Plug the microphone into the correct size adapter
in the top of the calibrator. Turn the calibrator on and press [OK] on the analyzer.
15.1.5.2.2. After calibration the analyzer will display the “Acoustic Sensor Calibration” screen.
15.1.5.3. “Acoustic Sensor Calibration”

ACES SYSTEMS Cobra II Specifications

General

Brand	ACES SYSTEMS
Model	Cobra II
Category	Measuring Instruments
Language	English