Gen II User Manual
3-16 – Using the Gen II Analyzer Chapter 3 Revision 2.10, April 20
Once the operation is complete, you will be returned to the applicable job function menu (“Main
Rotor Track & Balance Jobs” in our example).
3.4.3.4. – Export
Selecting the “Export” option presents a list of stored jobs on the “Export Job to USB” banner
screen. From the list you may choose a job to be exported directly to a USB flash drive. The
exported job file is saved in a “.tgz: format and is currently used to aid ACES Product Support
when assisting customers.
The selected job will be exported to the USB flash drive in the aces_export folder with the status
bar shown below indicating the progress.
To Next Page
Loading...
