ACES SYSTEMS Cobra II User Manual

8.3 Tail Rotor Balance Process 8-10
8.3.1 Starting a New Job 8-10
8.3.2 Setup List 8-11
8.3.3 Job Identification 8-12
8.3.4 Connect Sensors 8-12
8.3.5 Start Aircraft 8-13
8.3.6 Select Tail Rotor Condition Screen 8-14
8.3.7 Data Acquisition 8-14
8.3.8 Review Prior Run(s) Data 8-16
8.3.9 Shut Down Engines 8-17
8.3.10 Tail Rotor Maximum Weight “Warning” 8-17
8.3.11 Tail Rotor Suggested/Installed Weights Screen 8-18
8.3.12 Tail Rotor Re-Solve Feature 8-19
8.4 Tail Rotor Manage Data Functions 8-22
8.4.1 View Tail Rotor Balance 8-23
8.4.2 View Tail Rotor Chart 8-23
8.5 Resume Job 8-24
8.6 Manage Jobs 8-25
8.7 Manage Setups 8-25
8.8 Analyzer Chart Forms 8-26
8.8.1 Regular Chart Forms 8-26
8.8.2 Irregular Chart Forms 8-28
9
Transient Balance
(Viper II only)
(
Rev
2.
10
,
Apr
20
20
)
9.1 Create Setup 9-1
9.1.1 Transient Balance Setup 9-3
9.1.2 Sensor Information Screen 9-7
9.1.3 Transient Balance Speeds Screen 9-8
9.1.4 Define Class Wts Screen 9-10
9.1.5 Balance Plane Information Screen 9-13
9.1.6 Label Detail Wt Holes Screen 9-17
9.1.7 Define Transient Balance ICFs Screen 9-18
9.2 Start Job 9-19
9.2.1 Job Identification Screen 9-19
9.2.2 Engine Information Screen 9-20
9.2.3 Label Detail Wt Holes Screen 9-21
9.2.4 Transient Balance Equipment Setup Screen 9-21
9.2.5 Start Aircraft for Acceleration (Run 1) 9-22
9.2.6 Start Aircraft for Acceleration (Run 2) 9-31
9.3 Resume Job 9-32
9.4 Manage Jobs 9-33
9.5 Manage Setups 9-33
10
Fan/
T
urbine Balance
(Viper II only)
(
Rev
2.
1
0
,
Apr
20
20
)
10.1 Start Job 10-1
10.1.1 Fan/Turbine Balance Setup Screen 10-3
10.1.2 Fan/Turbine Balance Speeds Screen 10-7
10.1.3 Define Class Weights Screen 10-8
10.1.4 Balance Plane Information Setup Screen 10-10
10.1.5 Label Detail Wt Holes 10-15
10.1.6 Sensor Information Screen 10-15
10.1.7 Define Fan/Turbine Balance ICFs Screen 10-17
10.1.8 Job Identification Screen 10-18

ACES SYSTEMS Cobra II Specifications

General

Brand	ACES SYSTEMS
Model	Cobra II
Category	Measuring Instruments
Language	English