ACES SYSTEMS Cobra II - Page 7

13.1.7 Select Condition 13-22
13.1.8 Collecting Data with “Overall” or “Overall w/Record” 13-23
13.1.9 Collecting Data with “Spectra” or “Spectra w/Record” 13-25
13.1.10 Storing Data 13-30
13.2 Resume Job 13-31
13.3 Manage Jobs 13-32
13.4 Exporting Time Trace Reports 13-32
13.5 Custom Reports 13.34
13.6 Manage Setups 13-36
14
Vibra
tion Spectrum Survey
(
R
ev
4
.
1
0
,
A
pr
2017
)
14.1 Start Job 14-1
14.1.1 Vibration Spectrum Setup 14-3
14.1.2 Job Identification 14-11
14.1.3 Engine Information 14-12
14.1.4 Equipment Setup 14-13
14.1.5 Microphone Calibration (Viper II Only) 14-14
14.1.6 Start Engine 14-16
14.1.7 Select Condition 14-16
14.1.8 Collecting Data 14-17
14.1.9 Storing Data 14-23
14.2 Resume Job 14-24
14.3 Manage Jobs 14-25
14.4 Manage Setups 14-25
15
Overall Vibration Survey
(
Rev
4
.
1
0
,
A
pr
20
20
)
15.1 Start Job 15-1
15.1.1 Overall Vibration Setup 15-3
15.1.2 Job Identification 15-8
15.1.3 Engine Information 15-9
15.1.4 Equipment Setup 15-10
15.1.5 Microphone Calibration (Viper II Only) 15-11
15.1.6 Start Engine 15-13
15.1.7 Select Condition 15-13
15.1.8 Collecting Data 15-14
15.1.9 Storing Data 15-19
15.2 Resume Job 15-21
15.3 Manage Jobs 15-22
15.4 Exporting Time Trace Reports (Viper II only) 15-22
15.5 Manage Setups 15-24
16
Monitor Spectrum (
Rev
2.
1
0
,
A
pr
20
20
)
16.1 Monitor Spectrum 16-1
16.1.1 Spectra Setup 16-1
16.1.2 Speeds (Viper II only) 16-4
16.1.3 Monitor 16-6
17
Monito
r Magnitude and Clock (
Rev
2.
0
1
,
Apr
20
20
)
17.1 Monitor Magnitude and Clock 17-1
18
Monitor
Magnitud
e and
Phase (
Rev
2.
0
1
,
Apr
20
20
)
18.1 Monitor Magnitude and Phase 18-1