ANSI ONT safety guidelines
x July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
EMC, EMI, and ESD standards compliance
The ONT equipment complies with the following requirements:
• Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class
A requirements for OLT equipment
• GR-1089-CORE requirements, including:
• Section 3 Electromagnetic Interference, Emissions Radiated and Conducted
• Section 3 Immunity, Radiated and Conducted
• Section 2 ESD Discharge Immunity: System Level Electrostatic Discharge and EFT
Immunity: Electrically Fast Transients
Equipment safety standard compliance
The ONT equipment complies with the requirements of UL60950-1, Safety of
Information Technology Equipment.
Environmental standards compliance
The ONT equipment complies with the following standards:
• GR-63-CORE (NEBS): requirements related to operating, storage, humidity,
altitude, earthquake, office vibration, transportation and handling, fire resistance
and spread, airborne contaminants, illumination, and acoustic noise
• GR-487-CORE: requirements related to rain, chemical, sand, and dust
• GR-487 R3-82: requirements related to condensation
• GR-3108: Requirements for Network Equipment in the Outside Plant (OSP)
• TP76200: Common Systems Equipment Interconnections Standards
Laser product standards compliance
The ONT equipment complies with 21 CFR 1040.10/21 CFR 1040.11, 21 CFR
utilizing Laser Notice No. 50 or CDRH Laser Notice 42 of the regulations for lasers
and laser products by the U.S. Center for Devices and Radiological Health (CDRH)
of the Food and Drug Administration (FDA).
Resistibility requirements compliance
The ONT equipment complies with the requirements of ITU Recommendation K.21
for resistibility of telecommunication equipment installed in customer premises to
overvoltage and overcurrents.
Electrical safety guidelines
This section provides the electrical safety guidelines for the ONT equipment.
To Next Page
Loading...