Alcatel-Lucent 7342 - I-211 M-G Connections and Components; Figure 7-9 Connectors on an I-211 M-G

7 — ONT equipment layout
Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 7-13
3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual
Notes
(1)
The I-211M-D ONT uses RJ-11 and RJ-45 connectors that are not gel-filled.
(2)
The 3FE 51307 BA variant of the I-211M-D ONT does not include IDC connectors.
I-211M-G connections and components
The I-211M-G ONT is an integrated device that serves a variety of network needs
with different interfaces. Figure 7-9 shows the location of the connectors for the
interfaces on an I-211M-G.
Figure 7-9 Connectors on an I-211M-G
Table 7-9 defines the connectors on the I-211M-G ONT.
Power connectors Internal with optional auxiliary battery pack
Alarm connectors Internal
Connectors Description
(2 of 2)
Silence
Alarm
System Status
Battery Power
Replace Battery
Auxillary Power
Battery
Emergency Use
AC/DC Power
connector for OPSU
Type F coaxial
connector
Fiber storage
tray
SC/APC or OptiTap adapto
r
Per-terminated Ground
(via AC plug)
Battery
compartment
Lug or nut and
cup washers for
optional external
ground connection
Optional cable
strain relief
1957
2
PWR
BTRY
FAIL
VID
DATA
NTWK
MGMT
POTS
MOCA
Ethernet port
Ethernet IDC
connection
(optional)
RJ-11 POTS
ports
POTS IDC
connectors
TRTRTRTR
OPSU