2 — Feature descriptions
2-12 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
2.11 ONT Release 2.0 features
Table 2-10 describes the features for ONT Release 2.0.
Table 2-10 Features for ONT 2.0
Feature Description
DHCP Option 90 DHCP Option 90 provides authentication for servers and ONTs to prevent fraudulent
clients and servers, eavesdropping, and replay attacks.
HTTP Digest HTTP Digest provides ONT authentication for the voice, configuration, and profile
servers.
MoCA configuration support MoCA configuration is supported at the P-OLT. MoCA enables an ONT to carry Ethernet
data and RF video channels over a coaxial cable at subscriber premises.
ONT support The following indoor ONTs are supported in this release:
• I-010E-C
• I-220E-A
• I-221E-A
• I-020E-B
The following outdoor ONTs are supported in this release:
• O-410E-A
• O-411E-A
• O-211E-B
• O-210E-B
• O-420E-B
• O-421E-B
Performance monitoring
enhancements
Enhancements to the 15-min statistics counters allow for the retrieval of the
in-progress count for the current 15-min interval.
Additional internal 15-min and rolling counters for the collection of statistics are
provided for the following:
• layer 2 Ethernet at the ONT
• MoCA interface of the ONT
• GPON TC-layer for the ONT
TCA notification support is provided for selected 15-minute statistics counters.
Ping From a TL1 management session with the P-OLT, you can initiate a ping from the ONT
to any host device or server on the GPON. You can also disable the ONT from responding
to ping requests. The ONT responds to ping requests by default.
POTS power A new ONTPOTS parameter (POTSPWR) can be used to specify a period of time in
seconds, that an ONT port remains in a powered state after loss of ranging.
TLS Transport Layer Security (TLS) provides server authentication and privacy for Session
Initiation Protocol (SIP) signaling and profile downloads.
Upstream FEC Forward Error Correction (FEC) is used by the GEM transport layer between the ONTs
and an P-OLT, and is based on transmitting the data in an encoded format. The
encoding introduces redundancy, which allows the decoder to detect and correct the
transmission errors.
VoIP call statistics VoIP call statistics are gathered for the last incoming or outgoing call on each POTS port
that is configured for VoIP on the ONT. You can view these statistics from a
management session on the P-OLT.
To Next Page
Loading...