9 — ONT LEDs
Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 9-9
3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual
LEDs are provided as status indicators on the SWRD. The status indicators (with
factory default color settings) are described in Table 9-8.
Table 9-8 SWRD LEDs
Table 9-9 provides the LEDs on the RJ-45 Ethernet connector which is unused.
Table 9-9 LP MDU outdoor ONT RJ-45 LEDs
Table 9-10 provides descriptions of the various LEDs on the O-00240V-A MDU
ONT.
MGMT No communication, ranging,
synchronization between
P-OLT and MDU
Full communication, ranging,
synchronization between
P-OLT/ONT
Green flashing indicates ONT
disabled
—
POTS All customer phones are
on-hook, POTS is not
provisioned, or there are no
phones connected
One or more customer phones are
off-hook (aggregate)
Green flashing indicates SLID entry
mode
—
DATA1 through
DATA12
VDSL link not active (VDSL LP
MDU ONT)
Ethernet link not active (GE
LP MDU ONT)
VDSL link active (VDSL LP MDU
ONT)
A solid green light indicates the
respective Ethernet link is active
(GE LP MDU ONT)
A flashing green indicates either
receiving or transmitting activity
on the respective Ethernet link (GE
LP MDU ONT)
—
LED name Off Green Red
(2 of 2)
LED name Off Green
LAN No data connection to the home
network
Data connection to the home
network
ONT + PWR No data connection to the LP MDU Data connection to the LP MDU
PWR SWRD not powered SWRD powered
LED name Off Green Red
LINK Link down/inactive Ethernet link up/active (data in
either direction)
—
ACT No activity on Ethernet link Activity on Ethernet link —
To Next Page
Loading...