Alcatel-Lucent 7342 - Table 9-4 Alloptic Micronode 190 Return Path Transmitter LED (O-211 M-R)

9 — ONT LEDs
9-8 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
Table 9-4 Alloptic MicroNode 190 Return Path Transmitter LED (O-211M-R)
Table 9-5 Outdoor ONT RJ-45 LEDs (O-210E-B, O-211E-B, O-420E-B, and O-421E-B)
Note
(1)
The RJ-45 connectors on the O-421E-B outdoor ONT can be used to power the Gemtek dongle which has 3 LEDs. For more
information on these LEDs, see the manufacturer specifications.
Table 9-6 Outdoor ONT RJ-45 LEDs (O-211M-E, O-211M-G, O-211M-R, O-820G-D and O-821G-D)
Table 9-7 LP MDU outdoor ONT LEDs
Indicator Color Description
POWER Off
Green
Not powered
Power is available
Indicator
(1)
Color Description
LINK Off
Green
Not detected
Link active
MODE Off
Yellow
10 Mb/s operation
100 Mb/s operation
Indicator Color Description
LINK Off
Green
Flash
Not detected
Link active
Data activity
MODE Off
Green
Green (flashing)
Ethernet not provisioned or operating at 10 Mb/s
100 Mb/s
1000 Mb/s operation (flashing 1 s on, 1 s off)
LED name Off Green Red
POWER Not powered Power is available —
BTRY Battery power is low, battery
is missing, or battery failed
Battery good and charged —
FAIL Equipment 100% operational
and ranged/synchronized
— Equipment failed or no 1490 nm
link
VIDEO Video signal above acceptable
level or not provisioned
— Video signal (optical video
power) below acceptable level
DATA Not provisioned or no data At least one data link is active
(aggregate) (Ethernet or MoCA)
—
NTWK 1490 nm data path is
unavailable/non-operational
1490 nm data path is
available/operational
—
(1 of 2)