Alcatel-Lucent 7342 - Table 14-2 ONT Hardware Features (I-020 E-B and I-020 E-H)

14 — I-020E-B and I-020E-H unit data sheet
Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 14-3
3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual
Table 14-2 ONT hardware features (I-020E-B and I-020E-H)
Note
(1)
The POTS DSP is not used for these ONTs.
Table 14-3 describes software based features for the I-020E-B and the I-020E-H.
Features Chapter Reference
Functional description ONT overview Business ONT
Functional blocks
(1)
SoC based ONT functional blocks System on a Chip (SoC) technology
SoC functional blocks
Connections ONT equipment layout Connections
I-020E-B, I-020E-H, I-020G-F, and I-020G-G
connections and components
Service interface
specifications
ONT technical specifications Ethernet interface specifications
Physical description
(height, width, depth,
weight)
ONT technical specifications Indoor ONT (I-020E-B, I-020G-F, I-020G-G, and
I-020E-H)
Physical security features ONT software and security features Physical ONT security
LEDs ONT LEDs Indoor (I-series) ONT LEDs
Data flow characteristics ONT overview Indoor ONT
GPON wavelength ONT overview Indoor ONT
Optical budget ONT technical specifications ONT optical budget
Power consumption ONT technical specifications Indoor ONT (I-020E-B and I-020E-H)
Location and installation
options
ONT equipment layout Location options
Temperature and humidity
range
ONT technical specifications Environmental requirements
Fiber storage
compartment
——
ONT activation methods ONT software and security features ONT activation methods
SLID entry via craft
interface
——
SLID entry via POTS
interface
——
SLID entry via Ethernet
interface
ONT software and security features SLID entry via Ethernet port
Supported UPS I-020E-B and I-020E-H unit data sheet 12 v AC/DC power converter and cable, as listed in
Table 14-1 or in the 7342 ISAM FTTU ONT Planning
and Ordering Guide.