19 — I-211M-E unit data sheet
19-2 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
19.1 Identification
Table 19-1 provides identification information about the indoor ONTs.
Table 19-1 Identification of indoor ONTs
Note
(1)
See the 7342 ISAM FTTU ONT Planning and Ordering guide for product identification information.
19.2 General description
The indoor ONT provides the subscriber interface for the 7342 ISAM FTTU. The
ONT terminates the PON interface and converts it to user interfaces that directly
connect to subscriber devices. The ONT is compatible with all existing subscriber
equipment, including analog phones with both tone and rotary dial capabilities,
cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and
Type III).
The I-211M-E ONT meets or exceeds the specifications of MoCA 1.0 as determined
by the Multimedia over Coax Alliance (MoCA).
The indoor ONT provides the following functions:
• network demarcation for all services
• voice interworking function from the analog POTS lines to the VoIP/Ethernet
layers
• interworking functions between the GEM and Ethernet layers
• interworking functions between the GEM and MoCA layers
• interworking functions between the PON optical overlay and the RF video
interface
• mux and demux functions to the PON
• optical to electrical conversion
Part number Mnemonic
(1)
Description CLEI CPR ECI/Bar
code
3FE 51296 AA I-211M-E GPON I-series ONT unit, version E, 2
POTS, 1 Ethernet interface, 1 RF video,
and MoCA interface
BVM5N00CRA 211040 454318
3EM 22496 AA
(This variant
provides a
customer
specific logo.)
— See Delta OPSU/BBU unit data sheet BVM6C10FRA N70988 456475
3EM 22495 AA
(This variant
provides no
logo.)
— BVM6D10FRA N70988 456479