Alcatel-Lucent 7342 - I-241 G-A and I-240 G-A Connections and Components; I-040 G-A Connections and Components; Figure 7-4 I-241 G-A Indoor ONT Connections

7 — ONT equipment layout
7-8 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
Note
(1)
Both Ethernet ports support IPTV but only one of the two ports can be configured for IPTV support
at any one time.
I-241G-A and I-240G-A connections and components
The I-241G-A and I-240G-A ONTs are for indoor deployment and can be installed
vertically or horizontally. Connections to the SC/APC, RJ-45, RJ-11, and coaxial
connectors are on the outside of the ONT.
Figure 7-4 shows the I-241G-A indoor ONT physical connections.
Figure 7-4 I-241G-A indoor ONT connections
Table 7-5 describes the indoor ONT physical connections.
Table 7-5 Indoor ONT connections
I-040G-A connections and components
The I-040G-A ONT is for indoor deployment and can be installed vertically or
horizontally. Connections to the SC/APC and RJ-45 connectors are on the outside of
the ONT.
Connection Description
POTS connections This connection is provided through an RJ-11 phone connector.
RF video coaxial
connector (Type F)
This connection is provided through a coaxial cable.
Fiber optic port This connection is provided through a fiber optic cable.
Ethernet ports This connection is provided through an Ethernet RJ-45 cable. Up to four
Ethernet connections are supported.The Ethernet port can support
both data and in-band video services on all four interfaces.
Power This connection is provided through a cable to the ac/dc power
converter.
Video coaxical
connector
Ethernet
ports
Power
connectio
n
RJ-11 Phone
connectors
1939
7
2 112 3 4
PON
Fiber optic
port