Alcatel-Lucent 7342 - ONT Product Identification; Table 1-2 Designation for Indoor ONT, Outdoor ONT, and Service Plug-In Unit

1 — ONT overview
1-10 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
1.3 ONT product identification
Table 1-1 provides the identification information for the ONT product series.
Table 1-1 ONT product identification
In a product series, each ONT model can be further identified by a designation that
defines the characteristics of the particular model, such as the number of voice, data,
and video interfaces.
Table 1-2 provides the designation for the different models of indoor ONT, outdoor
ONTs, and the service plug-in unit.
Table 1-2 Designation for indoor ONT, outdoor ONT, and service plug-in unit
For example, O-210E-B identifies the following characteristics:
• O – an outdoor ONT
• 2 – two POTS interfaces
• 1 – one data interface
• 0 – no RF video interface
• E – 10/100 Ethernet
• B – the variant
Table 1-3 provides the designation for the modular ONTs.
Series Description
I-series Indoor ONTs
O-series Outdoor ONTs
M-series Modular ONTs
S-series Service plug-in units for modular ONTs
B-series Business ONTs
Position in mnemonic Description
Beginning character Indicates the series the product belongs to
First digit after the dash Refers to the number of POTS interfaces
Second digit after the dash Refers to the number of data interfaces
Third digit after the dash Refers to the number of video/MoCA interfaces
Character after the third
digit
Refers to the type of data service supported. The codes for the
supported types are:
• E for 10/100BASE-T Ethernet
• G for 10/100/1000BASE-T Ethernet (Gigabit Ethernet)
• V for VDSL
• M for MoCA and 10/100/1000BASE-T Ethernet (Gigabit Ethernet)
Ending character Refers to the variant