2 — Feature descriptions
2-2 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
2.1 Overview
This chapter provides a brief description of the features for 7342 ISAM FTTU
ONTs.
2.2 ONT Release 04.05.06 features
Table 2-1 describes the features for ONT Release 04.05.06.
Table 2-1 Features for ONT 04.05.06
Feature Description
ONT support The following indoor ONTs are supported in this release:
• I-220E-A
• I-221E-A
• I-211M-D
• I-211M-E
• I-211M-G
• I-020E-B
• I-020G-F
• I-020E-H
• I-040G-A
• I-241G-A (new to this release)
The following outdoor ONTs are supported in this release:
• O-211E-B
• O-211M-E
• O-211M-G
• O-210E-B
• O-420E-B
• O-421E-B
• O-820G-D (SOHO)
• O-821G-D (SOHO)
• O-821M-E (SOHO)
The following MDUs are supported in this release:
• O-00240V-A
• O-24121V-A
• O-24120V-A
• O-24121G-A
• O-24120G-A
The following business ONTs are supported in this release:
• B-8102-A
• B-8112-A
SLID The P-OLT can also communicate with the ONT if the ONT is installed and the P-OLT
knows the SLID of the ONT. Configuration of the ONT and its services can be done at
the P-OLT before or after the ONT is installed. After the P-OLT polls the PON for new
ONTS and the ONT sends its SLID, range, and registration information, the P-OLT
searches the P-OLT database for the same SLID. If a match is found, the P-OLT registers
the serial number of the ONT, and downloads ONT and service configuration data to the
ONT.