Alcatel-Lucent 7342 - Specifications

43 — PowerShield CP50B48 UPS unit data sheet
Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 43-5
3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual
The UPS has the following input/output connectors:
• input connector: IEC320/C5 3-wire inlet
• cord length: 6.5 ft (1.98 m)
• number of power cords: 1
• output connector: 3.5 mm removable, 7-pin screw terminal connector (ANSI:
accepts 16 to 26 AWG)
Table 43-4 shows the UPS output pinouts.
Table 43-4 UPS output pinouts
Notes
(1)
Tied to earth ground.
(2)
–48 V dc reference to pin 1 positive return (Vo+).
Figure 43-2 shows the output power and alarm connector.
Figure 43-2 APC UPS connector
43.8 Specifications
The following specifications apply to the UPS.
Pin number Signal Wire color
1 Positive return (Vo+)
(1)
Red (RED)
2 –48 V dc (Vo–)
(2)
Black (BLK)
3 Alarm Signal Return Green (GRN)
4On-BatterySlate (SLT)
5 Replace Battery Brown (BRN)
6 Battery Missing Blue (BLU)
7 Low Battery Orange (ORN)
Red Black Green Slate Brown Blue Orange
UPS Connector
1/4 in.
(.64 cm)
1897
7