7 — ONT equipment layout
7-12 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
Figure 7-8 Connectors on an I-211M-D
Table 7-8 defines the connectors on the I-211M-D ONT.
Table 7-8 I-211M-D ONT connectors
Alarm
Silence
System Status
Battery Power
Replace Power
System Status
Battery
Emergency Use
TRTRTRTR TRTRTRTR
AC/DC Power
connector for OPSU
Type F coaxial
connector
RJ-11 ports
RJ-45 port
POTS IDC
connectors
Fiber storage
tray
SC/APC or OptiTap adapto
Per-terminated Ground
(via AC plug)
Battery
compartment
Lug or nut and
cup washers for
optional external
ground connection
Optional cable
strain relief
POTS IDC
connectors
1935
PWR
BTRY
FAIL
VID
DATA
NTWK
MGMT
POTS
MOCA
OPSU
Note — The optical cable strain relief depicted in Figure 7-8 is
available only on the 3FE 51307 BA variant of the I-211M-D ONT.
Connectors Description
POTS connectors RJ-11 connectors for POTS connection with optional IDC connectors
(1)
(2)
Data and IP video
connectors
RJ-45 connectors for 10/100/1000BASE-T for Ethernet connection with
optional IDC-type connectors
(1)
(2)
Type F connector Type F connector that supports RG-6, and series 7 coax cables for CATV and
MoCA connection
PON optical
connectors
SC/APC or OptiTap connectors for GPON connection
(1 of 2)
To Next Page
Loading...