Alcatel-Lucent 7342 - Figure 7-23 Modular ONT Enclosure (External View)

To Next Page

To Previous Page

7 — ONT equipment layout

7-32 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06

ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA

Figure 7-23 Modular ONT enclosure (external view)

The modular ONT enclosure is designed for indoor and outdoor deployment, and can

be mounted on walls, poles, and in equipment racks. You can customize the

enclosure with a company logo. Brackets are used to mount the modular ONT on

walls, poles, and to the front of 19-inch and 23-inch racks.

The front-access door is locked with a screw-type locking device to prevent

unauthorized entry and protects the fiber connections, power switch, and alarms. The

door also provides a plastic solar shield. A second internal cover protects access to

the fiber and power terminals. Cable entry is made through openings at the bottom

of the enclosure. The cable entry openings are sealed against insects, dust, and water,

but not vapor.

Warning — Do not submerge the modular ONT. The modular ONT

cannot withstand water submersion caused by flooding. Equipment

damage will occur.

Tamper-resistant screw

1842