22 — I-241G-A and I-240G-A unit data sheet
22-2 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
22.1 Identification
Table 22-1 provides identification information about the I-241G-A and the I-240G-A
indoor ONTs.
Table 22-1 Identification of indoor ONTs
22.2 General description
The indoor ONT provides the subscriber interface for the 7342 ISAM FTTU. The
ONT terminates the PON interface and converts it to user interfaces that directly
connect to subscriber devices. The ONT is compatible with all existing subscriber
equipment, including analog phones with both tone and rotary dial capabilities,
cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and
Type III).
The indoor ONT provides the following functions:
• FSAN GPON standards compliant
• Network management support
• IP video with multistage IGMPv3 or IGMPv2 for channel change
• network demarcation for all services in an open business model
• voice interworking function from the analog POTS lines to the VoIP/Ethernet
layers
• interworking functions between the GEM and Ethernet layers
• interworking functions between the PON optical overlay and the RF video
interface
• mux and demux functions to the PON
• optical to electrical conversion
Part number Mnemonic Description CLEI CPR ECI/Bar
code
3FE 60344 AA I-241G-A I-241G-AGPON I-series ONT, version A,
asymmetric, 2 POTS, 4 Ethernet
10/100/1000Base-T, and 1 RF video
———
3FE 60344 AB I-240G-A 3FE 60397 AAI-240G-AGPON I-series ONT,
version A, asymmetric, 2 POTS, and 4
Ethernet 10/100/1000Base-T
———
1AF 01226 AK — The AC/DC power converter converts 120 V
ac to 12 V dc and installs inside the
customer residence. An Alcatel-Lucent
approved power cable is required.
———
1AB 07676
0009
— Cable, AS 3112 plug to IEC 60320 C13
connector, 3-conductor, 10 A, 250 V ac,
1.78 m, black (Australia/China)
———
To Next Page
Loading...