Alcatel-Lucent 7342 - Figure 7-3 Fiber Storage Tray and Internal SP;APC Connector

7 — ONT equipment layout
Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 7-7
3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual
Figure 7-3 Fiber storage tray and internal SP/APC connector
Table 7-4 describes the indoor ONT physical connections.
Table 7-4 Indoor ONT connections
Buffer tube
cable tie
Fiber
storage
tray
Fiber
cable tie
routing flangeFiber
Fiber cable
outer jacket
Cable tie
Fiber cable
buffer tube
Buffer tube routing
flanges
Buffer tube
cable ties
No100
9
SC/APC
connectio
n
Connection Description
POTS connections This connection is provided through an RJ-11 phone connector.
RF video coaxial
connector (Type F)
This connection is provided through a coaxial cable.
Fiber optic port This connection is provided through a fiber optic cable.
Ethernet ports This connection is provided through an Ethernet RJ-45 cable. Up to two
Ethernet connections may be supported, depending on the indoor ONT
model. The Ethernet port can support both data and in-band video
services
(1)
.
Power This connection is provided through a cable to the ac/dc power
converter.