21 — I-221E-A and I-220E-A unit data sheet
21-2 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
21.1 Identification
Table 21-1 provides identification information about the indoor ONTs.
Table 21-1 Identification of indoor ONTs
Note
(1)
See the 7342 ISAM FTTU ONT Planning and Ordering guide for product identification information, including additional
AC/DC power converter cabling information.
21.2 General description
The indoor ONT provides the subscriber interface for the 7342 ISAM FTTU. The
ONT terminates the PON interface and converts it to user interfaces that directly
connect to subscriber devices. The ONT is compatible with all existing subscriber
equipment, including analog phones with both tone and rotary dial capabilities,
cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and
Type III).
The indoor ONT provides the following functions:
• network demarcation for all services
• voice interworking function from the analog POTS lines to the VoIP/Ethernet
layers
• interworking functions between the GEM and Ethernet layers
• interworking functions between the PON optical overlay and the RF video
interface
• mux and demux functions to the PON
• optical to electrical conversion
Part number Mnemonic
(1)
Description CLEI CPR ECI/Bar
code
3FE 50754 AA I-221E-A GPON I-series ONT, version A, asymmetric,
2 POTS, 2 Ethernet, and 1 RF video
BVM3L00CRA 209112 449280
3FE 50754 AD BVM4P10DRA 210858 453967
3FE 50754 AB I-220E-A GPON I-series ONT, version A, asymmetric,
2 POTS, 2 Ethernet
BVM3M00CRA 209113 449281
3FE 50754 AE BVM4R10DRA 210860 453971
1AF 01226 AK — The AC/DC power converter converts 120 V
ac to 12 V dc and installs inside the
customer residence. An Alcatel-Lucent
approved power cable is required.
———
1AB 07676
0009
(1)
— Cable, AS 3112 plug to IEC 60320 C13
connector, 3-conductor, 10 A, 250 V ac,
1.78 m, black (Australia/China)
———
To Next Page
Loading...