Alcatel-Lucent 7342 - ONT Release 04.04.10 Features

2 — Feature descriptions
2-6 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
2.6 ONT Release 04.04.10 features
Table 2-5 describes the features for ONT Release 04.04.10.
Improved ONT software
download and activation
Software can be downloaded to an ONT using two methods:
• the SET-ONTSWDL TL1 command
The SET-ONTSWDL command provides the ability to download a new software
package from the OLT to the ONT at any time without risk of activation due to
unexpected ONT restart. The software remains in the passive state (SWVERPSV) and
never becomes the active software (SWVERACT) until the planned software
(SWVERPLND) is changed to match the passive software.
• the ENT-ONT or ED-ONT TL1 commands
The ENT-ONT and ED-ONT commands can be used to download and activate ONT
software by changing the planned software (SWVERPLND) parameter. If the passive
software (SWVERPSV) does not match the planned software, the ONT downloads
the required software from the OLT and activates the software.
A new alarm (SWDLFILE) is also supported that is raised when there is no software file
found on the OLT that matches the requested ONT Software download version. This
alarm can occur after using either software download methods described above. The
SWDLFILE alarm replaces SWDLFAIL alarm in this case.
SIP and H.248 voice software
interoperability
See the ONT Customer Release Notes for more information about softswitch
interoperability.
Perform line test even if busy Test commands provide option to “Force” a test even in the presence of a real or
suspected subscriber busy condition
Feature Description
(2 of 2)