2 — Feature descriptions
Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06 July 2008 2-9
3FE 51892 AAAA TCZZA Edition 01 ONT Product Information Manual
2.8 ONT Release 04.03.07 features
Table 2-7 describes the features for ONT Release 04.03.07.
Table 2-7 Features for ONT 04.03.07
E911 call protection with SIP This feature ensures that no E911 calls are dropped during a software upgrade. If an
E911 call is in progress, software activation fails and a software activation alarm is
raised.
New alarm filter commands This feature introduces alarm filter commands, both temporal and spatial, that allow
for the customizing of alarm reporting in alarm lists and logs.
New power supply This feature introduces the CyberPower CyberShield CS UPS for use with indoor and
outdoor ONTs.
Feature Description
(2 of 2)
Feature Description
ONT support The following indoor ONTs are supported in this release:
• I-010E-C
• I-220E-A
• I-221E-A
• I-020E-B
• I-020E-H
The following outdoor ONTs are supported in this release:
• O-211E-B
• O-210E-B
• O-211M-E
• O-420E-B
• O-421E-B
• O-820G-D (SOHO)
• O-821G-D (SOHO)
• O-24121V-A
• O-24120V-A
The following business ONTs are supported in this release:
• B-8102-A
• B-8112-A
RFC2833 transmission of DTMF This feature provides another way to transmit DTMF digits. With RFC 2833, the digits
are encoded in the RFC 2833 packets so that the server does not have to decode RTP
packets in order to process DTMF tones. This feature can be turned on or turned off by
setting the RFC 2833 parameter to enabled or disabled in the configuration profile file
(iConfig/FTP). When disabled, the ONT does not attempt to initiate the SDP
Offer/Answer negotiations. When enabled, the ONT knows to initiate offers between
the two endpoints using this transmission process for DTMF tones. This functionality is
implemented for both Broadworks Broadsoft and Nortel CS2000 softswitches.
(1 of 2)
To Next Page
Loading...