23 — M-300-A and S-840V-A unit data sheet
23-2 July 2008 Alcatel-Lucent 7342 ISAM FTTU ONT R04.05.06
ONT Product Information Manual Edition 01 3FE 51892 AAAA TCZZA
23.1 Identification
Table 23-1 provides identification information about the modular ONTs.
Table 23-1 Identification of modular ONTs
Note
(1)
See the 7342 ISAM FTTU ONT Planning and Ordering guide for product identification information.
23.2 General description
The modular ONT provides the subscriber interface for the 7342 ISAM FTTU. The
ONT terminates the PON interface and converts it to user interfaces that directly
connect to subscriber devices. The modular ONT is compatible with all existing
subscriber equipment, including analog phones with both tone and rotary dial
capabilities, cordless phones, modems, fax machines, and caller ID boxes (Type I,
Type II, and Type III).
The modular ONT provides the following functions:
• network demarcation for all services
• voice interworking function from the POTS lines to the VoIP/Ethernet layers
• interworking functions between the VDSL2 layer and Ethernet layer
• mux and demux functions to the PON
• optical to electrical conversion
23.3 ONT hardware and software features
Table 23-2 provides a list of hardware based features for the M-300-A and the
S-840V-A.
Part number Mnemonic
(1)
Description CLEI CPR ECI/Bar
code
3FE 50533 AA M-300-A GPON M-series ONT unit, version AA, up to
24 POTS, up to 12 VDSL2 ports, up to 3
S-840V-As, standard SC connector type.
BVM2W10DRA 208814 448715
3FE 50533 AB M-300-A GPON M-series ONT unit, version AB, up to
24 POTS, up to 12 VDSL2 ports, up to 3
S-840V-As, OptiTap connector type.
BVM2X10DRA 208815 448716
3FE 50537 AA S-840V-A Service plug-in unit BVL2MR0BAA 070AZF 138487
Note — Currently the M-300-A and the S-840V-A are only
supported in the ANSI market and DELT is not supported on the
M-300-A ONT.
To Next Page
Loading...