Chapter 3. 9500 MXC Nodes
Vol. II-3-14 Alcatel-Lucent
Table 3-5. 9500 MXC Node ODU/RAC Parameters
For more information on Node link capacities refer to Capacity and Bandwidth: PDH and SDH on
page 3-6, and to Capacity and Bandwidth: Ethernet on page 3-7.
ODU
1
1. For the 10 GHz band ODU 300ep is required.
Tx Power Over-Air ODU
Compatibility
2
2. For like band/capacity/modulation options.
RAC Link Capacity Bandwidth Modulation
ODU 300ep
6 to 23 GHz
ODU 300hp
6 to 38 GHz
Extended
High
ODU 300ep, hp
ODU 300hp, ep
RAC 30 4xE1 to 75xE1
4xDS1 to 100xDS1
1/3/4xDS3
1xSTM1/OC3
3.5 to 30 MHz
for ODU 300ep
7 to 30 MHz for
ODU 300hp
QPSK to 256 QAM
RAC 3X 64/75/93/100xE1
32/70/84/100xDS1
4xDS3
1/2xSTM1/OC3
28 to 56 MHz
30 to 50 MHz
40 MHz
28 to 56 MHz
QPSK to 256 QAM
RAC 40 64/75xE1
70/84/100xDS1
1xSTM1/OC3
28 MHz
30 MHz
28/30 MHz
64/128 QAM
32/64/128 QAM
128 QAM
To Next Page
Loading...
