Chapter 1. Introduction
Vol. III-1-4 Alcatel-Lucent
Unpacking the Equipment
To unpack the equipment:
1. Open the shipping boxes, carefully remove the equipment and place it on a
clean, flat working surface.
2. Ensure all the basic components and accessories for your system have been
included in the shipment by comparing the packaging, component part
numbers and product descriptions against the packing list, and cross-checking
against the installation datapack for the system to be installed.
3. If there has been shipping damage or there are discrepancies between the
equipment expected and the equipment received, contact your Alcatel-Lucent
service support center or your supplier.
4mm
2
(#12) green PVC
insulated strand copper
wire and grounding lugs
For grounding the indoor unit to the rack/frame
16 mm
2
(#6) green PVC
insulated strand copper
wire and grounding lugs
For grounding the rack to the station ground
Equipment Tool/Material Description
To Next Page
Loading...
