3DB 23063 ADAA - Rev 004 July 2007 Vol. IV-2-1
Chapter 2. Setting Up 9500 MXC CT
This chapter describes how to install 9500 MXC CT and its connection options.
The main topics are:
• Installing 9500 MXC CT on Your PC on page 2-1
• 9500 MXC CT to 9500 MXC Connection Options on page 2-3
• Starting 9500 MXC CT on page 2-19
• Next Step on page 2-29
Installing 9500 MXC CT on Your PC
This section describes the PC requirements and procedure for installing 9500
MXC CT on a PC.
PC Requirements
Hardware Requirements
The following are the minimum PC hardware requirements:
• IBM compatible
• P3 500 MHz
• 256 MB RAM
• 80 MB free hard disk space
•CD drive
• Serial COM port (COM1 or COM2), or USB port plus external USB-to-serial
adaptor for local V.24 connection, or Ethernet 10Base-T LAN port with RJ-45
connector for Ethernet local connection.
To Next Page
Loading...